|
Teknoflor™ is NO WAX, NO BUFF, ANTI-BACTERIAL and ANTI-FUNGAL. It also has ANTI-STATIC properties. Our main competitors DO NOT! We also offer custom borders to enhance design. Twenty-Four standard patterns are currently available. Custom logos and border designs are also available.
SLIP RESISTANT is also increased when water lies in the embossed channels of the floor,
leaving the peaks of the embossing dry. With a dry score of .88 and a wet score of 1.06,
Teknoflor’s Static Coefficient of Friction is in compliance with ADA requirements and is similar
to some non-slip safety floors. Thus, Teknoflor™ is perfect for operating room floors.
Teknoflor’s™ NO WAX / NO BUFF Benefits Include:
- No Sealers, Finishes, or Spray Buffing Required
- Anti-Bacterial and Anti-Fungal, improving hygiene
- Slip Resistant, improving Safety
- Electrical Resistance Average 2.5 x 1011 OHMS
- State-of-the-Art digital transfer design imprinting
- Thickness of 2.3 mm gauge – competitor’s gauge is 2.0 mm. This is especially
helpful in LDR rooms where wheels are known to tear up our competitor’s
thinner floors.
- Embossed surface that is difficult to scuff/scratch (Only walk on 20% of floor's surface)
- Semi-matte surface helps hide sub-floor irregularities, especially
adhesive trowel marks
- 10-Year Warranty
- Can be installed with cold or heat-welded seams
- Designer borders available
- Environmentally Friendly
 View/Print DESIGNER BORDERS
View/Print Information on ENVIRONMENTAL BENEFITS
View/Print TEKNOFLOR 5-YEAR COST ANALYSIS
Teknoflor™ is easily cleaned by damp mopping or auto-scrubbing, unlike our competition where it is necessary to buff-out scuff marks. Today’s healthcare facilities have very little time to remove
scuff marks, especially in patient rooms. In addition, buffing floors causes bacteria, dust, and wax
particles to be thrown into the air, which can be harmful to patients, especially in critical care areas.
The client’s maintenance cost is reduced considerably when using Teknoflor™. Other similar wood-grained floors need sealers and finishes adding expensive yearly maintenance costs. Teknoflor™ requires no sealers or finishes, thus reducing yearly maintenance costs!
Your investment payback on Teknoflor™ material is about two years. You will seldom recover
your investment with other floors due to their ongoing, higher operational costs.
Let Teknoflor™ Save You Money!
National Average to Maintain Sheet Vinyl,
Including Sealers, Finishes, Buffing, Recoating
And Stripping at $2.50 SF/Year |
Let’s Take 10,000 SF
10,000 SF x $2.50 SF |
Cost For One Year
$25,000.00 |
Using Teknoflor™, a truly No Wax, No Buff Floor
Your Cost is $ .50 SF/Year
To Simply Damp Mop or Auto-Scrub |
10,000 SF x $.50 SF |
$5,000.00 |
| |
ANNUAL SAVINGS
WITH TEKNOFLOR™ |
$20,000.00 |
Teknoflor’s™ embossed wear layer is a mixture of URETHANE and VINYL.. Teknoflor’s™ no-wax, no-buff system is built into the flooring, whereby one only walks on 20% of its surface. On competitors’ flooring, 100% of the surface is walked on, therefore creating scuffs.
|
